No. 92337221

Sold
Technics - SA-5600X Quadrofonic - Solid state stereo receiver
Final bid
€ 750
5 h ago

Technics - SA-5600X Quadrofonic - Solid state stereo receiver

Very good looking fully working and good sounding vintage Technics receiver. 240V selected for longer life time. All lamps are new Contacts cleaned Idle currency checked okay With phono input. Good FM stereo reception. Tuning range: FM, MW General: Manufacturer: Technics (Technics By Panasonic) Model: SA-5600X Type: Quadraphonic Receiver Years of manufacture: 1973 - 1976 Made in: Japan Color: Brushed aluminum front, wooden cabinet Remote control: Power consumption: Dimensions: 430 x 146 x 385 mm (WxHxD). Weight: 10.9 kg Original price approx.: 1'495 DM Connections Number of inputs: phono: 2.5 mV, 50 kOhm, max. 330 mV Microphone: 3 mV (6.3mm jack) Aux 2-channel: 200 mV, 50 kOhm Aux 4-channel: 200 mV, 50 kOhm Tape Play 1, 2, 2-channel: 200 mV, 50 kOhm Tape Play DIN, 2-channel: 200 mV, 50 kOhm Tape Play 1, 2, 4-channel: 200 mV, 50 kOhm Tape Play DIN, 4-channel: 200 mV, 50 kOhm Discrete 4-channel: 200 mV, 50 kOhm Main In: Antenna (FM: 75, 300 Ohm, AM). Number of Outputs: Tape Rec 1, 2: 180 mV Tape Rec DIN: 30 mV Dolby NR Adapter: Pre Out: 1 V Headphones (6,3mm jack): 1x front, 1x rear 2 speaker pairs front 2 pairs of rear speakers Technical Data Amplifier Continuous power 4-channel (at distortion): 8 Ohm: 4x 8.5 W (RMS, 20 Hz - 20 kHz, 0.5 %). 4 Ohm: Continuous power 2-channel (at distortion): 8 Ohm: 2x 25 W 4 Ohm: Dynamic power: 8 Ohm: 4 Ohm: Total harmonic distortion: < 0.5 % Attenuation factor: 30 at 8 Ohm Frequency response: 10- 50'000 Hz, - 3 dB Power bandwidth: 13 - 20'000 Hz, - 3 dB Signal-to-noise ratio: Phono: 70 dB High level: 90 dB Tone control: Bass: ± 10 dB at 50 Hz Treble: ± 10 dB at 10 kHz Loudness: + 9.5 dB at 50 Hz, + 4 dB at 10 kHz Treble filter: Subsonic: Mute: yes, - 20 db Tuner Reception: FM, MW Frequencies: FM: 88 - 108 MHz MW: 530 - 1,605 kHz Input sensitivity: FM: 1.8µV MW: 8µV Frequency response: 30 - 15,000 Hz (+0.3 dB, -1 dB) Distortion factor: FM, 1 kHz: < 0.4% (mono), < 0.7% (stereo). Signal-to-noise ratio: FM: 57 dB (mono), 52 dB (stereo) MW: 55 dB Channel separation: 35 dB (1kHz) selectivity: 70 dB Co-wave selection: 1.5 dB Spurious wave selection: FM: 80 dB MW: 35 dB Image frequency attenuation: FM: 85 dB MW: 40 dB IF attenuation: FM: 85 dB MW: 35 dB AM suppression: 55 dB Special Features Switch 4-channel matrix 1, 2 , discrete / stereo / mono Microphone input fron Little signs of use Carefully insured shipped!

No. 92337221

Sold
Technics - SA-5600X Quadrofonic - Solid state stereo receiver

Technics - SA-5600X Quadrofonic - Solid state stereo receiver

Very good looking fully working and good sounding vintage Technics receiver.

240V selected for longer life time.
All lamps are new
Contacts cleaned
Idle currency checked okay
With phono input.
Good FM stereo reception.
Tuning range: FM, MW

General:

Manufacturer: Technics (Technics By Panasonic)
Model: SA-5600X
Type: Quadraphonic Receiver

Years of manufacture: 1973 - 1976
Made in: Japan
Color: Brushed aluminum front, wooden cabinet
Remote control:
Power consumption:
Dimensions: 430 x 146 x 385 mm (WxHxD).
Weight: 10.9 kg
Original price approx.: 1'495 DM

Connections

Number of inputs:
phono: 2.5 mV, 50 kOhm, max. 330 mV
Microphone: 3 mV (6.3mm jack)
Aux 2-channel: 200 mV, 50 kOhm
Aux 4-channel: 200 mV, 50 kOhm
Tape Play 1, 2, 2-channel: 200 mV, 50 kOhm
Tape Play DIN, 2-channel: 200 mV, 50 kOhm
Tape Play 1, 2, 4-channel: 200 mV, 50 kOhm
Tape Play DIN, 4-channel: 200 mV, 50 kOhm
Discrete 4-channel: 200 mV, 50 kOhm
Main In:
Antenna (FM: 75, 300 Ohm, AM).
Number of Outputs:
Tape Rec 1, 2: 180 mV
Tape Rec DIN: 30 mV

Dolby NR Adapter:
Pre Out: 1 V
Headphones (6,3mm jack): 1x front, 1x rear
2 speaker pairs front
2 pairs of rear speakers

Technical Data

Amplifier

Continuous power 4-channel (at distortion):
8 Ohm: 4x 8.5 W (RMS, 20 Hz - 20 kHz, 0.5 %).
4 Ohm:
Continuous power 2-channel (at distortion):
8 Ohm: 2x 25 W
4 Ohm:
Dynamic power:
8 Ohm:
4 Ohm:
Total harmonic distortion: < 0.5 %
Attenuation factor: 30 at 8 Ohm
Frequency response: 10- 50'000 Hz, - 3 dB
Power bandwidth: 13 - 20'000 Hz, - 3 dB
Signal-to-noise ratio:
Phono: 70 dB
High level: 90 dB
Tone control:
Bass: ± 10 dB at 50 Hz
Treble: ± 10 dB at 10 kHz

Loudness: + 9.5 dB at 50 Hz, + 4 dB at 10 kHz
Treble filter:
Subsonic:
Mute: yes, - 20 db

Tuner

Reception: FM, MW
Frequencies:
FM: 88 - 108 MHz
MW: 530 - 1,605 kHz
Input sensitivity:
FM: 1.8µV
MW: 8µV
Frequency response: 30 - 15,000 Hz (+0.3 dB, -1 dB)
Distortion factor:
FM, 1 kHz: < 0.4% (mono), < 0.7% (stereo).
Signal-to-noise ratio:
FM: 57 dB (mono), 52 dB (stereo)
MW: 55 dB

Channel separation: 35 dB (1kHz)
selectivity: 70 dB
Co-wave selection: 1.5 dB
Spurious wave selection:
FM: 80 dB
MW: 35 dB

Image frequency attenuation:
FM: 85 dB
MW: 40 dB
IF attenuation:
FM: 85 dB
MW: 35 dB
AM suppression: 55 dB

Special Features

Switch 4-channel matrix 1, 2 , discrete / stereo / mono
Microphone input fron

Little signs of use
Carefully insured shipped!

Set a search alert
Set a search alert to get notified when new matches are available.

This object was featured in

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

How to buy on Catawiki

Learn more about our Buyer Protection

      1. Discover something special

      Browse through thousands of special objects selected by experts. View the photos, details and estimated value of each special object. 

      2. Place the top bid

      Find something you love and place the top bid. You can follow the auction to the end or let our system do the bidding for you. All you have to do is set a bid for the maximum amount you want to pay. 

      3. Make a secure payment

      Pay for your special object and we’ll keep your payment secure until it arrives safe and sound. We use a trusted payment system to handle all transactions. 

Have something similar to sell?

Whether you're new to online auctions or sell professionally, we can help you earn more for your special objects.

Sell your object