Osama - Osama Lusso Marmo-NO RESERVE PRICE - Fountain pen
Current bid
€53
Comparatively to writing with a regular ballpoint pen, writing with a fountain pen provides an unmatched experience. But using a fountain pen is not like using a ballpoint pen. One must have considerable dexterity.
First, you have to hold the fountain pen between your thumb and index finger if you want to write with enjoyment. We call this the tripod position or grip. Here the pen rests on the knuckle of your middle finger while your other fingers rest on the writing surface. This grip guarantees the pen stays strong in your hand, enabling simple movement while you write.
Hold your pen in the ''sweet spot,'' once you feel you have a comfortable grip. The fountain pen nib slides elegantly across the paper here. When your pen feels resisted against paper, or the ink doesn't flow freely, you will know it isn't in the sweet spot.
Hold the nib of your fountain pen in the sweet spot by angulating it 40 to 50 degrees against the paper. Once you have the pen right, make sure you use the appropriate writing action for a flawless output. Write using your whole lower arm to keep the fountain pen in the sweet spot.
Furthermore, write with a fountain pen using less pressure than with a ballpoint pen. For best ink flow and to prevent leaving ink blotches or breaking the nib, write gently and glide the pen lightly across the writing surface.
Comparatively to standard ballpoint pens, fountain pens provide an unparalleled writing experience. You have to first load a fountain pen with ink before you can use it. Fountain pens come essentially in three flavors: piston, converter, and cartridge. Your version will call for a new ink-filling method.
The most often used variety and the easiest to fill are cartridge fountain pens. Simply inserting a cartridge into the barrel of a cartridge pen will enable you to begin writing.
Hold your fountain pen nib at a 45-50-degree angle against the writing surface, once you have fitted the cartridge. Make sure the tines of your fountain pen lay equally on the writing surface and avoid twisting the pen in your hand while you write. Your pen may lose contact with the paper and skid off your writing surface without these actions.
Don't press your fountain pen excessively hard when you write. If you do, you might ruin the nib of your pen or prevent it from writing. Apply just enough force then to let the ink flow.
Always keep your fountain pen capped once you finish writing to guard the nib and stop it from drying out. For optimal use, also make sure your fountain pen is routinely cleaned since over time dust, paper fiber, and other trash can clog it.
Finally, even if it's not required, choose premium, fountain-pen compatible paper. Although fountain pens write nicely on ordinary paper, if you use low-quality paper you could run across problems such as skipping, ink blots across the paper, or even tears.
Fountain pen nibs accumulate a lot of dust, paper fibers, dirt, and other trash overtime that could lead to poor writing. You will most likely need to clean your fountain pen if it stops writing either totally or just stops.
First, uncap your fountain pen to clean it. Then, from the fountain pen barrel, disassemble the nib or grip part. After that, run the nib part under cool or lukewarm, running water for roughly ten seconds until no residual ink shows. Steer clear of boiling water since excessive temperatures can compromise the internal components of your pen.
Then put the nib portion in a glass filled with lukewarm water and let it sit for one hour or so until the ink permeates the water. Keep this going until the water stays colorless.
Should you still notice traces of residual ink, soak the nib section overnight in a solution comprising roughly five parts water to one part vinegar. As another alternative, search for a fountain pen cleaning agent. Many retail outlets provide these solutions, which typically come in a bottle or kit including cleaning directions.
Remove the nib portion from the water and let it dry for roughly one day once there is no residual ink. To get best results, remove any last water from the nib portion by rubbing the nib with a soft cloth. Insert the cartridge or converter and fastening it to the fountain pen barrel once the nib dries.
A fountain pen is a pen with a nib and an ink reservoir. The pen takes in ink from the reservoir via a feed to the nib. It then allows the ink to flow to the tip when you place it against a writing surface and apply pressure through gravity and capillary action.
While they seem like they've been around for ages, the modern fountain pen has existed for just over two centuries. The earliest fountain pen that's somewhat similar to present-day pens was patented by Frederick Fölsch in 1809 in England, though it was a rudimentary writing tool that required further refinement.
While the fountain pen was developed further throughout the 19th century, it only became common in the mid-19th century, phasing out feather quills and dip pens. Eventually, they gained widespread popularity in the 1900s and maintained their popularity for most of the early 20th century until ballpoint pens displaced them in the 1950s.
Since the advent of fountain pens, there have been numerous pen variants. However, while there are many types of fountain pens, they are primarily classified according to their ink-filling mechanism. Some common types of fountain pens include cartridge, converter, eyedropper, crescent, and piston fountain pens.
The fountain pen wasn't invented by a single individual. Many people, instead, contributed to its creation. The first fountain pen originated in 10th-century Egypt when Arab caliph Abu Tamim Ma'ad al-Mu'izz li-Din Allah sought for a pen that would not stain his hands or garments. Then he was handed a pen with a reservoir of ink.
However, modern fountain pens first appeared in the 19th century. Frederick Fölsch in England got the first patent for a fountain pen in May 1809. John Scheffer also obtained an English patent for his fountain pen invention about a decade later, and his model was the first to show modest uniqueness and popularity.
Romanian inventor Petrache Poenaru later, in 1827, was granted a French patent for a novel fountain pen. Poenaru's design was the first to incorporate an ink-containing barrel, unlike earlier ones.
Still, even with this discovery, manufacturers started mass-producing fountain pens only in the 1880s. Lewis Waterman invented the first pen with commercial success in 1884. Operating on the capillarity concept, it made sure the ink flow was constant by using air. This invention stopped the pen from leaking, therefore setting the foundation for the future growth of the fountain pen.
The first lighter was invented in 1823 by German chemist and professor Johann Wolfgang Döbereiner. Known as the Döbereiner's lamp or tinderbox, the lighter looked nothing like contemporary lighters. It looked more like a lamp but became widely popular, selling over a million units in the 1820s.
Unlike modern lighters, the Döbereiner's lamp didn't use gas or flint. Instead, it worked by passing flammable hydrogen produced within the lamp by a chemical reaction with sulphuric acid over a platinum metal catalyst. This caused it to ignite and emit substantial heat and light.
Later in 1903, ferrocerium was invented by the Austrian chemist Carl Auer von Welsbach. The synthetic alloy contributed significantly to the development of the modern lighter, as it made creating sparks for ignition easy.
There were several subsequent developments to the lighter during the early 20th century, but one of the most significant breakthroughs happened in 1926 when the Ronson company launched the Ronson Banjo. The Ronson Banjo was the world's first automatic pocket lighter, and it required just the click of a button to ignite.
Later, in 1933, the American inventor George Grant Blaisdell invented the iconic Zippo lighter. Renowned for its portability and reliability, the Zippo lighter became widely popular, and to date, it's still a public favorite.
It just takes a few minutes to pretty easily refill your lighter with butane. However, you should exercise caution when refilling your lighter. First, as butane is quite flammable, let your lighter cool for at least half an hour before refilling it if you recently lit it.
Turn the dial clockwise till the end to then set the flame adjuster knob with a screwdriver at its lowest level. To release any trapped gas or air, push the refilling valve with the screwdriver. The refilling valve is a tiny hole at the bottom of the lighter.
Hold your lighter upside down later to prevent introducing air into it since air can cause your lighter to fail. Attach the butane can's nozzle to the refill valve on your lighter. Pump butane into your lighter in a three-second interval. Depending on the butane level, you could have to perform this three to four times at least.
A few lighters feature a gauge showing the butane level. If yours has one, find out whether it is at maximum level. On the other hand, stop refilling should your lighter lack a gauge and you come across any resistance or gas leaks.
Once full, let your lighter sit for at least five minutes so the butane settles and reaches room temperature.